D Link DAP 1720 Setup

High-performance Wi-Fi range extenders like the D Link DAP 1720 Setup are made to increase wireless coverage in your house or place of business and get rid of dead zones. The DAP-1720’s straightforward plug-in architecture and easy-to-use web-based setup or QRS mobile app make setup quick and simple. For dependable and quick connections, it features dual-band technology, which makes it perfect for surfing, gaming, and streaming. To assist in determining the best location, the extender has smart signal indications and a gigabit Ethernet connector for wired devices. Without having to deal with complicated setups, customers can enjoy seamless Wi-Fi coverage throughout their area with the DAP-1720.

D Link DAP 1720 Setup Manual

The DAP-1720 should be persevered into a power passage close to your router.
Anticipate the dense green turn of the Power LED.
Connect your device or computer to the Wi-Fi network that is shown as the default on the label.
Go to http://dlinkap.local in a web browser or type the IP address by default.

Use the default dlink login information (admin/admin or the one listed on the device label) to log in.

To scan and connect to your current Wi-Fi network, follow the dlink wifi extender setup instructions displayed on the screen.
Enter the passwords for the 2.4GHz and/or 5GHz networks you have chosen.
Your extended network’s name and password can be changed or left the same.
After setting it up, position the extender between your router and a spot with poor signal strength.
For maximum results, use the LED signal indication to determine the ideal location.

D’Link DAP 1720 Setup WPS

The DAP-1720 should be plugged into a power plug adjacent to your router.
Await the stabilization of the Power LED.
Click the WPS button on your current wireless network router.
Press the WPS knob on the DAP-1720’s side.
The extender will automatically establish a Wi-Fi connection with your router.
A successful connection is often indicated by solid green LEDs on the DAP-1720.
After connecting, you may move the extender halfway between your router and the spot where Wi-Fi isn’t strong.
To make sure the positioning is correct, use the signal strength LED.
Now, devices may use the same password as your primary router to connect to the expanded Wi-Fi network.
Without a computer or app, this is the quickest and most straightforward D Link DAP 1720 Setup approach.

D Link DAP 1720 Setup With App

Get the QRS mobile app on Google Play or the App Store.
Wait for the DAP-1720 to start up after plugging it in.
Link your smartphone to the WiFi network that is shown as the default on the label.
After opening the QRS Mobile App, choose “Setup Device.”
The app will identify the DAP-1720 and provide setup instructions.
Enter the password for the Wi-Fi network or networks you currently use.
You may either replicate your primary network or alter the network name and keyword for your extension.
Verify the D Link DAP 1720 Setup and let the application use it.
Once the extender is set up, disconnect it and move it to a better coverage area.
To maximize placement, use the app or the signal forte pointer on the extender.
D Link DAP 1720 Setup is simple with the QRS Mobile app, especially for non-technical users.

D Link DAP 1720 Setup Issues And Solutions

If your d-link DAP 1720 not connecting or if you face any issue with setup then here are some tips that can resolve the issue:

Problem: Unable to Access the Dlinkap.local Web Interface

Solution: Verify that you are using the extender’s built-in WiFi. Try 192.168.0.50 as your IP address. Try a new browser or clear the cache in your current one.

Problem: Inadequate WPS Setup

Solution: Verify that the extender and router are within range and support WPS. Press the router WPS switch first, followed by the extender. If the LED does not turn dense green, try again.

Problem: d-link DAP 1720 not connecting to the wifi network.

Solution: Verify the correctness of your Wi-Fi password. Make sure you choose the proper network by running the D Link DAP 1720 Setup process again. During initial configuration, try bringing the extender closer to the router.

Problem: After setup, the signal is weak.

Solution: The DAP-1720 should be moved halfway between your router and the location with the poor signal. To regulate the superlative location, use the signal strength LED.

Problem: Devices Continue to Disconnect

Solution: Use the web interface to make sure your firmware is current. Steer clear of cordless phones, microwaves, and walls that might interfere.

Problem: Device Not Detected by the Setup App

Solution: Before using the QRS app, manually connect to the extender’s Wi-Fi. If necessary, restart the device and the app.

Most problems like d-link DAP 1720 not connecting are resolved by proper installation and routine firmware upgrades.

D’Link DAP 1720 Reset

Find the DAP-1720’s Reset button, which is often a tiny pinhole on the side or bottom.
Wait for the LED to steady after turning on the extender.
Hold down the Reset key.
When the LED blinks or shuts off, release the button.
After rebooting, the extender will return to its initial factory settings.
Passwords, WiFi names, and other customized settings will be deleted.
Reconnect to the default Wi-Fi network (the SSID is listed on the label) after the reset.
To change the device’s configuration, use the QRS app or the online interface (http://dlinkap.local).
Resetting is useful for resolving connectivity problems or beginning a new configuration.
Keep your WiFi login information close to hand in case you need to reconfigure it.

D’Link DAP 1720 Firmware Update

Use Ethernet or Wi-Fi to connect your computer to the DAP-1720.
Launch a web browser and navigate to either 192.168.0.50 or http://dlinkap.local.
Enter your admin credentials to log in (typically admin/admin by default).
Navigate to the interface’s Management or Firmware Update section.
If you’re online, click Check for Updates; if not, manually download the firmware from D-Link Support.
Download and store the most recent firmware file locally if it’s manual.
After choosing the firmware that has been downloaded, click Choose File and then Upload.
Throughout the update, don’t unplug or turn off the extension.
Upon accomplishment of the installation, the device will automatically restart.
Look for the firmware version in the admin panel after resuming.
Firmware updates can address issues, introduce new features, and enhance performance.
Periodically checking for firmware upgrades is advised.

FAQs

How can I determine whether my D-Link DAP-1720 is operating correctly?

Examine the device’s LED indications. Amber denotes a poor signal, red denotes no connection, and a solid green light shows a good connection. You may also confirm by using your laptop or phone to test internet access over the expanded network.

Can I give the extension the same Wi-Fi name?

Yes, you have the option to use the same SSID and password as your primary router when setting it up. This makes traveling across networks easy. You can tell if you’re connected to the primary router or the extension, though, by using a different name.

If my extender isn’t connecting to my router, what should I do?

Verify that the extension is in range of your network and that the Wi-Fi password is entered correctly. Try restarting the setup after resetting the DAP-1720. For a quick and simple connection, you may also utilize the WPS button approach.

Does my DAP-1720’s firmware need to be updated?

It is advised to upgrade the firmware in order to guarantee peak performance, address issues, and improve security. Updates may be downloaded from D-Link’s support website or checked using the web interface. To prevent disruptions, always carefully follow the update instructions.